Lincoln Electric Welding Consumables 214T5 User Manual

Date:  
MSDS No.:  
11/15/06  
CAN-CW800-C  
Trade Name:  
Blue Max Flux Cored Stainless Electrodes  
Sizes:  
All  
Supersedes:  
1/5/04  
M A T E R I A L S A F E T Y D A T A S H E E T  
For Welding Consumables and Related Products  
Conforms to Workplace Hazardous Materials Information System (WHMIS) Rev. November, 1988  
Section I & II - Preparation and Product Information  
Flux Cored Electrode  
Product Type:  
Products:  
Blue Max FC-308L, FC-309L, FC316L,  
The Lincoln Electric Company of Canada LP  
179 Wicksteed Avenue  
FCP 309L, FCP316L  
Toronto, Ontario M4G 2B9 CANADA  
Phone: (416) 421-2600  
Prepared by The Lincoln Electric Company, Cleveland, Ohio, USA  
(216) 481-8100, on the date shown above.  
Section III - Hazardous Ingredients (1)  
I M P O R T A N T !  
This section covers the materials from which this product is manufactured. The fumes and gases produced during welding with the normal use of this  
product are covered by Section VII; see it for industrial hygiene information.  
CAS Number shown is representative for the ingredients listed. All ingredients listed may not be present in all sizes.  
(1) The term “hazardous” in “Hazardous Ingredients” should be interpreted as a term required and defined in the Hazardous Products Act and does not  
necessarily imply the existence of any hazard.  
TLV  
LD50  
LC50 mg/m3  
Ingredients:  
CAS No. Wt. % mg/m3 (Route/Species) (Route/Species)  
2.16 mg/kg LDLo  
(intravenous/rat)tumorigenic  
Chromium and chromium alloys or compounds (as Cr)  
7440-47-3  
7439-89-6  
7440-02-0  
13463-67-7  
12004-83-0  
7439-98-7  
7439-96-5  
1344-09-8  
14808-60-7  
7429-90-5  
7789-75-5  
66402-68-4  
12719-90-3  
7440-21-3  
584-08-7  
5-10  
5-10  
1-5  
0.5(b)  
10*  
1.5  
Not Available  
Not Available  
Not Available  
Not Available  
Not Available  
Iron  
Not Available  
50 mg/kg LDLo  
Nickel (metal)  
(intravenous/mouse)  
Titanium dioxides (as Ti)  
1-5  
10  
Not Available  
Zirconium alloys and compounds (as Zr)  
Molybdenum alloys (as Mo)  
Manganese and/or manganese alloys and compounds (as Mn)  
Silicates and other binders  
Quartz  
1-5  
5
Not Available  
114 mg/kg LDLo  
(intraperitoneal/rat)  
9 g/kg  
1-5  
10  
Not Available  
2.3 LCLo  
(inhalation/human)  
1-5  
0.2  
(oral/rat)  
1153 mg/kg  
(oral/rat)  
1-5  
10*  
#0.05**  
10  
Not Available  
300 LCLo  
(inhalation/human)  
200 mg/kg LDLo  
(intratracheal/rat)  
0.1-1  
0.1-1  
0.1-1  
0.1-1  
0.1-1  
0.1-1  
0.1-1  
Aluminum and/or aluminum alloys (as Al)  
Fluorides (as F)  
Not Available  
4250 mg/kg  
(oral/rat)  
Not Available  
Not Available  
Not Available  
Not Available  
Not Available  
Not Available  
2.5  
Complex compounds  
***  
10*  
10*  
10*  
Not Available  
114 mg/kg LDLo  
(intramuscular/rat)  
Titanium and/or titanium alloys (as Ti)  
Silicon and/or silicon alloys and compounds (as Si)  
Alkali carbonates  
Not Available  
1870 mg/kg  
(oral/rat)  
Stainless steel tube  
60-100  
Nominal tube composition:  
2.16 mg/kg LDLo  
(intravenous/rat)tumorigenic  
50 mg/kg LDLo  
Chromium  
Nickel  
7440-47-3  
7440-02-0  
7439-96-5  
7439-89-6  
19  
10  
0.5(b)  
1.5  
Not Available  
Not Available  
2.3 LCLo  
(inhalation/human)  
(intravenous/mouse)  
9 g/kg  
(oral/rat)  
Manganese  
Iron  
1.5  
bal.  
0.2  
10*  
Not Available  
Not Available  
Notes: (*) Not listed. Nuisance value maximum is 10 milligrams per cubic (LDLo, LCLo) Lowest published toxic concentration.  
meter. TLV value for iron oxide is 5 milligrams per cubic meter.  
(b) The OSHA PEL for chromium (VI) is 5 micrograms (0.005  
(**)  
As respirable dust.  
milligrams) per cubic meter. The TLV for water soluble  
chromium (VI) is 0.05 milligrams per cubic meter and the  
TLV for insoluble chromium (VI) is 0.01 milligrams per  
cubic meter.  
(***)  
These compounds contain oxides of Si, K. The lowest TLV is 5 for  
those metals and oxides having a TLV listing and 10 milligrams  
per cubic meter for those not listed.  
(#) Crystalline silica (quartz) is on the IARC (International  
Agency for Research on Cancer) and NTP (National  
Toxicology Program) lists as posing a carcinogenic risk to  
humans.  
Section IV - Physical Data  
Physical data such as odor, vapor pressure, density, evaporation rate and freezing or boiling points are not listed as they are not applicable to  
this product and its use.  
Section V - Hazard Data  
Non Flammable; Welding arc and sparks can ignite combustibles and flammable products. See CSA W117.2 Section 9.7 as referenced in  
Section VIII. Product is inert, no special handling or spill procedures required.  
Rev 11/06b  
(CONTINUED ON SIDE TWO)  
 

KTI Networks Switch KPOE 800 1P User Manual
Lasko Fan LAS3300 User Manual
LG Electronics Computer Monitor 22MP55HQ User Manual
Liebert Power Supply RAC2 8 User Manual
Life Fitness Treadmill 95T XXXX 07 User Manual
Louisville Tin and Stove Electric Heater VFM103 User Manual
Makita Sander BO5012K User Manual
Makita Saw 4323 User Manual
Maytag Microwave Oven JMC8127DD User Manual
Mercedes Benz Automobile 2003 CLK 320 User Manual