Lincoln Electric Welding System V205 T AC DC User Manual

TIG WELDERS  
®
Invertec V205-T AC/DC  
Output  
For TIG and Stick Welding  
The Invertec® V205-T AC/DC is a compact, TIG power source intended  
for critical AC or DC TIG welding. From maintenance to production fabri-  
cation, to motorsports, aerospace, nuclear piping and shipbuilding, this  
feature-packed inverter is flexible enough for almost any job! Variable  
AC frequency allows you to focus the arc when precise control is  
required. The 115/230V input voltage auto-reconnect makes the V205-T  
AC/DC extremely useful almost anywhere in the shop or in the field.  
AC  
DC  
Input  
1
PHASE  
50  
60  
Hz  
Processes  
Stick, TIG  
Advantage Lincoln  
Precision Arc Performance  
200 amps @ 40% duty cycle is the highest output rating in this  
machine class.  
Added Stick Crisp Mode for exceptional Fleetweld® 5P and 5P+ (E6010)  
Performance.  
Auto-reconnects for single phase 115/230V 50/60 Hz input allows  
the flexibility to weld in the shop or take in the field where 230V  
may not be available.  
Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.  
Adjustable DC strike mode – Allows adjustment of a hotter or colder start  
depending on the tungsten diameter.  
Weighs in at a mere 38 lbs. (17.3 kg) making it easy to carry around the  
shop or job site.  
AC/DC inverter for TIG with advanced inverter technology to optimize arc  
performance.  
Simple Controls  
Full featured TIG control – up to 11 variable – including pulse, upslope,  
downslope and balance control.  
Adjustable AC output frequency allows the operator to focus the arc  
minimizing the heat affected zone.  
Easy to read sequence diagram with LEDs displays selected parameter  
for easy setting with a single knob.  
Extended AC Balance Control helps maintain a pointed tungsten to direct  
the arc in the weld joint.  
Outstanding Quality  
Selectable waveshapes – Square wave for fast travel speeds and  
excellent puddle control, sine wave for a traditional softer sounding arc,  
triangular wave to reduce the heat input into the weld at low amperages.  
Fan-As-Needed (F.A.N.) fan only operates when needed to reduce power  
consumption, noise and dust in machine.  
High quality stick welding with such popular Lincoln® electrodes as  
Newly designed using the latest power electronic technology for  
improved reliability.  
Fleetweld® 5P, 35, 37, 180 and Excalibur® 7018.  
Professional Features  
CSA C/US Certified.  
Three-Year Lincoln® Warranty on parts and labor.  
Voltage Reduction Device (VRD). When enabled from the set up menu  
reduces the open circuit voltage in STICK mode for use in electrically  
hazardous conditions or when the use of a VRD is required.  
TECHNICAL SPECIFICATIONS  
Input  
Dimensions  
H x W x D  
inches (mm)  
Product  
Name  
Product  
Number  
Rated Output  
Current/Voltage/Duty Cycle  
Current @  
Output  
Range  
Net Weight  
lbs.(kg)  
Input Power  
Rated Output(1)  
Invertec®  
V205-T AC/DC  
150A/16.0V/40% TIG  
120A/14.8V/60% TIG  
100A/14.0V/100% TIG  
200A/18.0V/40% TIG  
170A/16.0V/60% TIG  
140A/15.6V/100% TIG  
110A/24.4V/35% Stick  
90A/23.6V/60% Stick  
70A/22.8V/100% Stick  
180A/27.2V/35% Stick  
150A/26.0V/60% Stick  
130A/25.2V/100% Stick  
34.0A  
25.0A  
20.0A  
30.0A  
18.0A  
15.0A  
34.0A  
28.0A  
20.0A  
30.0A  
23.0A  
19.0A  
K1855-4  
115V/1/50/60  
230V/1/50/60(2)  
115V/1/50/60  
6-200 A  
AC/DC  
Max. OCV:  
53.7  
15.0 x 8.5 x 19.0  
(381 x 216 x 483)  
38  
(17.3)  
230V/1/50/60(2)  
(1) Input amps on 60Hz input.  
(2) Also operates on 208 input volts.  
Publication E3.110 06/07  
Web Update 06/08  
 
RECOMMENDED OPTIONS  
PTW-20 water-cooled torch may  
be connected with an optional  
K1622-4 Twist-MateTM adapter.  
Order K1784-3 for PTW-20, 12.5 ft.  
Order K1622-4 PTW-20 adapter  
A full line of TIG torches and parts  
kits in various lengths and types  
are available.  
STICK OPTIONS  
Stick Electrode Holder, Work  
Clamp, Cable & Twist-Mate™ Set  
Includes 200A stick electrode  
holder, #4 welding cable, work  
cable and Twist-Mate™ set.  
Order K2394-1  
®
Request Lincoln Publication  
E12.150 for more information.  
TIG OPTIONS  
®
Foot Amptrol  
TIG-Mate™ 9 Air-Cooled TIG  
Torch Starter Pack  
Provides 25 ft. (7.6m) of remote  
current control for TIG welding.  
(6 pin plug connection)  
Order K870  
Get everything you need for TIG  
welding in one complete easy-to-  
order kit packaged in its own  
portable carrying case. Includes:  
PTA-9 Ultra-FlexTM torch, gas lens  
parts kit, Harris® flowmeter/regula-  
tor, Twist-MateTM adapter, gas hose,  
work clamp and cable.  
Hand Amptrol  
Provides 25 ft. (7.6m) of remote  
current control for TIG welding.  
(6 pin plug connection).  
Velcro straps secure torch.  
Order K963-3 (one size fits all  
Pro-Torch TIG torches).  
Order K2413-1  
TIG-Mate™ 17 Air-Cooled  
TIG Torch Starter Pack  
Arc Start Switch  
Get everything you need for TIG  
welding in one complete easy-to-  
order kit packaged in its own  
portable carrying case. Includes:  
PTA-17 Ultra-FlexTM torch, parts  
kit, Harris® flowmeter/regulator, 10  
ft. gas hose, PTA-17 Twist-MateTM  
adapter, and work clamp and  
10 ft. cable.  
May be used in place of the Foot  
or Hand Amptrol. Comes with a 25  
ft. (7.6m) cable and 6-pin plug  
connector. Attaches to the TIG  
torch for convenient finger control  
to start and stop the weld cycle at  
the current set on the machine.  
Order K814  
Order K2266-1  
Cool-Arc40 Water Cooler  
Energy efficient long life cooler for  
water-cooled welding applications.  
Order K1813-1 for 115V.  
TIG-Mate™ 20 Water-Cooled  
TIG Torch Starter Pack  
Get everything you need for TIG  
welding in one complete easy-to-  
order kit packaged in its own  
portable carrying case. Includes:  
PTW-20 torch, parts kit, Harris  
flowmeter/regulator, 10 ft. gas  
hose, PTW-20 Twist-MateTM  
adapter, work clamp and cable  
and 10 ft. water hose.  
Water Cooler Hoses  
(CGA to CGA)  
For 5/8" LH CGA fitting applica-  
tions at both cooler and wire  
feeder. Kit contains two 25 ft.  
hoses with 5/8" left hand CGA  
fittings on both ends of hose.  
Order K1859-2  
Order K2267-1  
Hose Coupler (11N18)  
Additional or alternate torches  
may be ordered:  
5/8" LH CGA female fitting on  
both ends allows a water hose  
from cooler to connect directly to  
the water line of the TIG torch.  
Order S19558-6  
Pro-Torch™ TIG Torches  
One-piece air-cooled PTA-9 or -17  
TIG torches may be connected  
directly with the included K1622-1  
TIG Torch Adapter.  
Order K1781-1 for PTA-9,  
12.5 ft., 1-cable.  
Cut Length Consumables  
TIG welding filler metals are  
available for welding stainless  
steel, mild steel, aluminum and  
copper alloys.  
Order K1782-1 for PTA-17,  
12.5 ft., 1-cable.  
®
Request Lincoln Publication  
C9.10 for more information  
One-piece air-cooled PTA-26  
TIG torches may be connected  
with an optional K1622-3  
Twist-Mateadapter.  
Order K1783-1 for PTA-26,  
12.5 ft., 1-cable.  
GENERAL OPTIONS  
Small Canvas Cover  
Protect your machine when not in  
use. Made from attractive red can-  
vas that is flame retardant, mildew  
resistant and water repellent.  
Includes a convenient side pocket  
to hold welding torch or gun.  
Order K2377-1  
Order K1622-3 PTA-26 adapter  
Invertec® V205-T AC/DC  
[3]  
 
RECOMMENDED OPTIONS  
GENERAL OPTIONS, CONT.  
Welding Cart  
Utililty Cart  
Lightweight cart stores and trans-  
ports welder, 80 cubic foot shield-  
ing gas cylinder, welding cables  
and accessories. Includes an  
angled top shelf for easy access  
to welder controls, a lower tray for  
added storage space, a sturdy  
handle and a convenient cable  
wrap hanger.  
Heavy duty cart stores and trans-  
ports welder, 150 cubic foot  
shielding gas cylinder, welding  
cables and accessories. Includes  
stable platforms for welder and  
gas bottle platform, lower tray for  
added storage capacity and  
adjustable height handle.  
Order K520  
Order K2275-1  
®
INVERTEC V205-T AC/DC  
PRODUCT DESCRIPTION  
ORDER NUMBER  
QUANTITY  
PRICE  
®
Invertec V205-T AC/DC 115/230/1/50/60  
K1855-4  
K2350-2  
®
®
Invertec V205-T AC/DC One-Pak Package  
Recommended Stick Options  
Stick Electrode Holder, Work Clamp, Cable & Twist-Mate™ Set  
K2394-1  
Recommended TIG Options  
TIG-Mate™ 9 Air-Cooled TIG Torch Starter Pack  
TIG-Mate™ 17 Air-Cooled TIG Torch Starter Pack  
TIG-Mate™ 20 Water-Cooled TIG Torch Starter Pack  
Pro-Torch™ TIG Torches:  
PTA-9 TIG Torch, 12.5 ft., 1-cable, 125 amps  
PTA-17 TIG Torch, 12.5 ft., 1-cable, 150 amps  
TIG Torch Adapter (required for PTA-9, -17)  
PTA-26 TIG Torch, 12.5 ft., 1-cable, 200 amps  
TIG Torch Adapter (required for PTA-26)  
PTW-20 TIG Torch, 12.5 ft., 250 amps  
TIG Torch Adapter (required for PTW-20)  
Foot Amptrol  
K2413-1  
K2266-1  
K2267-1  
see publication E12.150  
K1781-1  
K1782-1  
K1622-1  
K1783-1  
K1622-3  
K1784-3  
K1622-4  
K870  
Hand Amptrol  
K963-3  
Arc Start Switch  
K814  
Cool Arc™ 40 Water Cooler:  
115/1/50/60  
K1813-1  
220-240/1/50/60  
K2187-1  
Water Cooler Hoses (CGA to CGA)  
Hose Coupler (11N18)  
K1859-2  
S19558-6  
Cut Length Consumables  
see publication C9.10  
Recommended General Options  
Small Canvas Cover  
Welding Cart  
K2377-1  
K2275-1  
K520  
Utility Cart  
TOTAL:  
C U S T O M E R A S S I S T A N C E P O L I C Y  
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the  
needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond  
to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,  
with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to  
such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has  
been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.  
Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility  
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.  
THE LINCOLN ELECTRIC COMPANY  
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com  
 

Kustom Portable Speaker Ardent 12 User Manual
La Crosse Technology Weather Radio WS 7048U User Manual
Land Pride Spreader 20583 User Manual
Laser Handheld TV DVBT C30 User Manual
Learning Resources Games LER 2493 User Manual
LG Electronics Cell Phone VX3300 User Manual
Liebert Surge Protector H2120Y444R 03 User Manual
Liesegang Projector dv305 User Manual
Lightolier Indoor Furnishings 1113IE User Manual
Linear Vacuum Cleaner V222 User Manual