M Audio Computer Drive Omnistudio USB User Manual

OMNISTUDIO USB

Multi-language quick start guide

Quick Start Guide

This guide is intended to help get you started

quickly. In order to achieve optimal usage of

your new Omnistudio USB, we recommend that

you carefully study the enclosed product

manual, either after completing the process

described in this guide or before.

Connecting the OmniStudio USB

Connect the OmniStudio USB’s Monitor outputs to your amplifier or

powered monitors. If you are monitoring through headphones, connect

one or two sets of headphones to the OmniStudio USB’s headphone outputs.

Connect your microphones, instruments or other line level analog

sources to the OmniStudio USB’s front panel Mic/Inst inputs 1 and 2, and

line level sources to the rear panel Line Inputs 3 and 4.

Connect your MIDI synths or sound modules to the OmniStudio USB’s

Stereo Aux Inputs 1 through 4. Connect your external processors to the FX

send and FX returns and/or the Channel 1 and 2 Inserts.

Connect your external MIDI device(s) to the OmniStudio USB’s MIDI In and

MIDI Out connectors.

For more information on the OmniStudio USB’s hardware connections

and how to use them, please refer to the Users’ Manual.

OMNISTUDIO USB